德国OKA warm tips:
1. Before slotting: confirm the water pipe direction and equipment position
First of all, according to the decoration design drawings and house type structure, determine whether the water pipe is ceiling or floor.
At the same time, confirm the location, installation method and whether hot water is required for water purifiers, water heaters, toilets, wash basins and other water equipment.
2. Slotting Construction: pay attention to process specifications
① Pre construction communication: the construction can be officially started only after communication and negotiation with the construction personnel. The hydraulic master first draws the line with an ink line to outline the route that needs to be taken.
② Undercut: use the special tool cutter to cut the grooved surface according to the line, and then use the electric hammer to cut the groove.
Important reminder: during construction, pay attention not to cut off the reinforcement, so as not to affect the quality and safety of the house.
3. Slotting size: required by specific standards
In addition to the order of slotting, pay attention to the width, depth and height of slotting. Width of wall slot: 4cm for single slot and 10cm for double slot; Wall slot depth: about 3-4cm.
The height should be based on the specific requirements of different water equipment.
4. Slotting Construction: selection is very important for hydraulic masters
The above standard construction can only be operated by professional hydraulic masters. Therefore, when slotting the water pipe, we should also choose the right hydraulic master.